close up nuclear reactor meltdown footage

Current water levels inside the reactor remain unknown. The containment vessel was flooded with seawater during the reactor meltdown when other attempts to cool it failed. The probe revealed corroded piping and dripping humidity, but did not reveal the water’s surface level, which TEPCO had expected to be as high as four meters. The endoscope is unlikely to help Tepco to determine the state of the melted nuclear fuel, much of which is believed to have burned down to the bottom of the containment vessels, but will hopefully shed some light on coolant water levels and internal damage. In particular, TEPCO needs to find out about the state of the melted nuclear fuel at the reactor cores, the level of coolant water and the extent of the damage to the containment vessels. Obtaining a clearer picture inside the containment vessels of the three crippled reactors is critically important, as the vessels are the last line of defense containing their melted nuclear fuel. The footage, which you can see above, is the first interior view of the disabled reactor unit 2, one of three reactors that failed in March 2011. (TEPCO) inserted an 8.5mm remote-controlled endoscope and thermometer into the containment vessel of a failed reactor at the Fukushima Daiichi nuclear plant. In an attempt to look at the damage inside one of its failed Fukushima reactors, the Tokyo Electric Power Co.

Close up nuclear reactor meltdown footage